|
|
| 20MM 1/2 GAL MAX-EMITTERLINE |
 |
Tubing Material
Dow UC 7510 or equivalent |
Master Batch
Finger print master batch carbon black processed into the tube
with min 2.2% carbon black, good dispersion and mix. |
|
Length |
1000 ft (304.8 meters) |
| I.D. |
.675 (17.1 MM) |
| O.D. |
.765" (19.4 MM) |
| Wall |
.050" (1.14 MM) |
About the Emitters
Max-Emitters with 330° screening around the ID of the emitter to
the inlet of the 330° flow path with two emission holes drilled
at 180º apart |
| Operating PSI |
15
PSI |
| Nominal Flow
|
1/2 GPH (2
LPH) |
Emitter
Material
|
Dow High Density
Polyethylene (HDPE) or equivalent |
|
CV (coefficient
of manufacturer's variation) |
=/<3% |
 |
|
Description
Ore’Max Max-Emitterline ½ GPH (2 LPH) is continuous tubing with Max-Emitters
installed internally and welded to the inside of the tubing. Standard
features such as 330º turbulent flow path, hundreds of 330º screened inlets
and dual outlets drilled 180º apart make the Max-Emitterline the performance
choice for leaching systems. situations. With it’s flanged
outlet, the emitter directs the solution to the exact entry point into the
leach pad.
Tubing
Superior grade flexible Linier Low Density Polyethylene (LLPE) formulated
for chemical resistance and exterior use. Resistant to environmental stress
cracking and UV derogation
|
|
|
PART
NUMBER |
SPACING
(in) |
SPACING
(cm) |
WEIGHT (lbs) |
WEIGHT
(kg) |
550 ROLL/
Container Weight (lbs) |
550 ROLL/
Container Weight (kg) |
|
OL22014M |
14" |
35.5 |
50.0 |
22.68 |
27,500 lbs |
12,474 kg |
|
OL22016M |
16" |
40.6 |
49.1 |
22.27 |
27,005 lbs |
12,249 kg |
|
OL22018M |
18" |
45.7 |
48.1 |
21.81 |
26,445 lbs |
11,996 kg |
|
OL22020M |
20" |
50.8 |
47.5 |
21.55 |
26,125 lbs |
11,853 kg |
|
OL22022M |
22" |
55.9 |
46.9 |
21.27 |
25,795 lbs |
11,698 kg |
|
OL22024M |
24" |
60.9 |
46.5 |
21.09 |
25,575 lbs |
11,600 kg |
|
|
